Mobile Stables and Stores

Moveable, require minimal groundworks and in most cases do not require planning permission.

Mobile stables are easily constructed (ideal for our DIY / Self assembly option), generally don't require planning permission and are incredibly versatile. Our mobile stables are built to the same high specification as our standard stables using fully treated timbers externally and internally.

Mobile Stables can be easily moved around the paddock

Our Mobile Stables can be supplied on either timber or metal skids allowing the stable to be moved freely around the paddock or to a different location with the use of a heavy duty metal chain. Timber skids measure 150mm x 75mm (6” x 3”) and are pressure treated. Metal skids measure 100mm x 100mm (4” x 4”).

The image to the right is an example of a building which has been fitted with optional 2.1m (7’) wide galvanised metal gate, other sizes are also available. As a further option, single doors, double doors or stable doors can be fitted.

Mobile Stables are available either as a single, double or treble unit, with or without canopies. They are constructed in the same way as our Mobile Field Shelters and can be moved by most four wheel drive vehicles.

View Full Specifications
On this timber building

Wall Construction

Walls are built with 75mm x 50mm (3" x 2") timber framing, spaced at 600mm (2') centres.

Wall Cladding

Selected high quality Shiplap boarding, pressure impregnated with Tanalith E™ to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust resisting nails.

Roof Construction

Purlins are 100mm x 50mm (4” x 2”) spaced at 600mm (2’) centres, held in place by joist holders on prefabricated trusses, then covered with black, maintenance-free Onduline. Optional roof finishes include coloured Onduline, felt or felt tiles. Clear roof sheets are available on request.

Read more about available Roof finishes

Timber Mobile Skids

Timber skids are constructed using pressure treated 150mm x 75mm (6" x 3") skids in conjunction with 50mm x 50mm x 4mm metal steels. Towing joints are located at both ends and a heavy duty chain is provided.

Metal Mobile Skids

Metal skids are constructed using 100mm x 100mm x 5mm box steel and are powder coated. Towing points are located at both ends and a heavy duty chain is supplied.

Kickboards

Lined to 1200mm (4’) with 18mm (¾”) high density, moisture resistant board and can be fully lined to eaves if required.

Canopy/Overhang

Front overhangs extend to 1200mm (4’) and can be underlined as an optional extra.

Guttering

Half round, black guttering and downpipe is fitted to the front of all units. Rear guttering is available on request.

Height

To eaves, measures 2160mm (7’1”) and to ridge 2770mm (9’1”).

Barge Boards

All in pressure impregnated, prepared timber, fixed with rust resisting nails.

Timber Treatement

All timber is pressure treated with Tanalith ETM wood preservative.

Read more about Timber Treatment.



Request a Brochure
On this timber building
 

Main Features

  • Fully treated timbers externally and internally
  • 150mm x 75mm (6” x 3”) timber skids or...
  • 100mm x 100mm (4” x 4”) metal skids
  • 18mm (¾”) moisture-resistant kickboard to 1.2m (4’)
  • Heavy duty chain
  • 1200mm (4’) canopy to front with guttering and downpipe
 

Options and Finishes