Workshops

Our range of Workshops are very versatile and can be adapted for almost any use.

Gain some extra space alongside your property whether its for serious work, DIY or hobbies.

A timber Workshop provides a great way to utilise the unused space in your garden. Workshops, as standard, include a single 762mm (30”) wide door. The building above with double doors illustrates a 7.3m (24’) gable end span, but we can manufacture a building with a gable end of up to 10.3m (34’). Whilst the longest length we have on our price list is 14.6m (48’), any length is achievable.

Insulation is essential for a workshop that you will be using all year round...

Workshops are constructed using 75mm x 50mm (3” x 2’’) prepared timbers, and as with garages, we place a builders lining paper between the studwork and cladding. As an option, Rockwool insulation can be placed between the studwork and then ply-lined for extra warmth.

Making the most of natural daylight

Double-glazed casement windows and doors can be fitted as an option to any of our buildings to enhance their versatility. Alternatively, a cost effective option is to include a clear roof sheet to the roof of your workshop. This will maxmise the amount of light available and enhance the security of the building.

View Full Specifications
On this timber building

Move
Close

Wall Construction

Walls are built with 75mm x 50mm (3” x 2”) timber framing, spaced at 600mm (2’) centres.

Wall Cladding

Selected high quality Shiplap and Weatherboard, pressure impregnated to ensure a long maintenance-free life. Loglap and Cedar are available as options. All boarding is fixed with rust resisting nails.

Wall Lining

Reinforced moisture resistant bitumen impregnated lining paper to BS 1521 (120gsm) grade. This is placed between the studwork and cladding. Various internal wall linings and Rockwool insulation are available on request.

Roof Construction

Purlins are 100mm x 50mm (4” x 2”) which are held in place by joist holders on prefabricated trusses, then covered with black, maintenance free Onduline roof sheeting. Options include coloured Onduline, felt or felt tiles.

Doors

A single 762mm (30”) wide outward opening personal door is included as standard. Doors are framed, ledged and braced, faced with Shiplap and a ply interior lining. Also available are personal inward opening doors, double doors, joinery grade doors with frames or up and over doors. All door fittings are galvanised.

Windows

A range of single and double, glazed and unglazed casement windows are available on request. Glazing for the above can also be supplied.

Height

To eaves either 2235mm (7’4” ) or 1980mm (6’6”) when on a single course of brickwork. Apex heights will vary depending upon the width of the building, please enquire.

Guttering

Black 100mm (4”) half round guttering and down pipes are fitted.

Barge Boards

All in pressure impregnated, prepared timber, fixed with rust resisting nails.

Floors

Can be fitted as an optional extra. High density, flooring grade 18mm (¾”) V313 moisture resistant board is placed on 75mm x 50mm (3” x 2”) pressure impregnated timbers spaced at 406mm (16”) centres. Alternatively, tongue and grooved floor boarding is available